Introduction
In this guide from the Center for Microscopy and Image Analysis (UZH, Zurich, Switzerland) you will learn how to:
- define data storage location and
- initiate data transfer after acquisition
on the Akoya Vectra Polaris widefield microscope.
For more information please check the intrument's webpage.
-
-
Ensure your data is saved in a folder named with your core account credentials that is located under D:\Data\PhenoImagerHT\
-
For instance: D:\Data\PhenoImagerHT\j.doe
-
USB drives are blocked.
-
-
-
Make sure all slides have been scanned and the software is closed before you start this step. Starting the Datamover while Vectra Polaris software is still running will cause data loss.
-
Open Citrix Workspace and log on.
-
Select and launch the application "CORE Datamover" (the first time you start it might take up to 3 minutes).
-
Select Akoya Vectra Polaris/PhenoImager (Schlieren) datamover and click on "Request".
-
You will get a confirmation that your request has been created. Your transfer job will be queued within 15 minutes.
-
If you do not receive an email after your request or if you need further support, please contact us at it@zmb.uzh.ch.
-
Cancel: I did not complete this guide.
One other person completed this guide.
