Introduction
This guide shows how you operate the incubator around the microscope stage.
-
-
Open the gas bottles, or check if they are open.
-
Open the switches for the CO2 and if you need for the N2 line.
-
Open positition
-
-
-
Turn on the gas and temperature controller. The three "on" switches are on the backside of the controllers.
-
Switch on all three controllers.
-
Adjust temperature.
-
Set your gas concentrations
-
-
-
Open the incubator box on the microscope.
-
Check the water level of the bottle. It should be 60% filled for a weekend experiment.
-
The dish has to be placed on top of the cell culture dish.
-
Let the system equilibrate for 30 min, before you place your living sample and start your imaging.
-
Do the steps in reverse, after you finish your experiment. Before you close the gas bottles check if someone else is using the gas supply for the GE Incell
-