Olympus ScanR HCS (Irchel) - Part1: Start up

The correct start up sequence is very important for proper microscope function. Carefully follow the next steps.

Switch on the left power switch on the top shelve. If it jumps, please try again and check if the one at the right is also facing forward.

Make sure, that the other switch is also pulled forward.

Turn on the PC.

Next, switch on the microscope touch screen. You will find a button on the back.

Press "Start Operation" on the display.

Select the 4x objective.

To avoid collisions, please make sure the objective is at the lowest possible position.

Log in using your ZMB credentials.

You can now check the next part of this guide on how to acquire your images here.