Visitron Spinning Disk - Shut down

Lower objectives to the lowest limit by pressing "NikonZ Lower Limit".

Toggle between the objectives to Clean the used immersion objectives using the available KIMTECH wipes and 100% EtOH.

Finally select the lowest magnification - here 10x.

Close the software by crossing it out

Remove the used stage insert by releasing the screw (arrow direction indicates how to loosen the screw) and stow away accordingly

Check in the reservation system if there is another booking shortly after you.

If "YES" just sign-out from the PC.

If "NO" shut-down the PC.

After the PC has been shut-down completely, switch OFF all power supplies ([3], [2] and [1]).

Cover the microscope.