v3.0

by Joana Raquel Delgado Martins

Spinning Disk - Visitron (Irchel): Shut down

Written By: Jana Döhner (and one other contributor)
  • Comments: 0
  • Favorites: 0

Difficulty

Easy

Steps

3

Time Required

00:05:00

Sections

1

Flags

0

  1. Clean the used immersion objectives using the available KIMTECH wipes and 100% EtOH. Close the software by crossing it out

    • Clean the used immersion objectives using the available KIMTECH wipes and 100% EtOH.

    • Close the software by crossing it out

  2. Remove the used stage insert by releasing the screw (arrow direction indicates how to loosen the screw) and stow away accordingly

    • Remove the used stage insert by releasing the screw (arrow direction indicates how to loosen the screw) and stow away accordingly

  3. Check in the reservation system if there is another booking shortly after you. If "YES" keep the laser keys ON, and just sign-out from the PC. If "NO" shut-down the PC and turn OFF all laser keys (4).

    • Check in the reservation system if there is another booking shortly after you.

    • If "YES" keep the laser keys ON, and just sign-out from the PC.

    • If "NO" shut-down the PC and turn OFF all laser keys (4).

    • After the PC has been shut-down switch OFF all power supplies (3, 2 and 1)

    • Cover the microscope.

Finish Line

Author

with 1 other contributor

Jana Döhner

Member since: 04/10/2019

1,609 Reputation

21 Guides authored

Team

ZMB Staff Member of ZMB Staff

11 Members

144 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 3

All Time: 102