-
-
On the main menu, select "Advanced modules" and from the drop-down menu, select "Fuse Views"
-
The package's window will open, and you will be able to modify the fusing parameters on the top panel.
-
At the bottom panel you will see updates on the status of the fusing, or if something is not working.
-
-
-
Indicate the folder that contains your experiment. This folder should contain all positions and stacks you have imaged. The software will later ask which position(s) to fuse.
-
Indicate the "Crop size". This is some degree of offset between the two views, as well as limiting the fusing to your areas of interest.
-
Indicate the group of "Settings" that is to be fused.
-
Indicate the channel to fuse with the name of the excitation wavelength. Options are: "488", "561", "638", and "Transmitted".
-
You will get an update on whether you've set up things correctly. If so then you can continue.
-
To begin the fusing you click on "Start"
-
As you click start the window will open where you will select which position to sure. Select it.
-
